SpeedyBee App 1.8.8

SpeedyBee is a flight controller parameter settings application that allows for communication between mobile devices and flight control boards via Bluetooth. With SpeedyBee Bluetooth-UART Adapter, you can easily set the parameters of your flight controller without any Bluetooth signal interference during the flight.

In order to use SpeedyBee, you need to make sure your flight controller meets the following requirements:

• Betaflight firmware version ≥ 3.1.0
• iNav FC version ≥ 1.8.1
• Butterflight firmware version ≥ 3.1.0

Regarding system requirements, SpeedyBee is compatible with iOS 12.0 or higher.

To start using SpeedyBee, follow these instructions:

1. Connect the Bluetooth PCB to the UART interface of your Flight Controller or use a flight controller with integrated Bluetooth.
2. Open the Betaflight Configurator and go to the Ports tab. Open the Configuration/MSP port of the Bluetooth PCB and set the baud rate value to 19200 if you are using a BLE4.0 Bluetooth module.
3. Open the SpeedyBee app and connect your Flight Controller via Bluetooth. You can then start adjusting the parameters as needed.